Colonel Crawford En-Campment

Over the weekend I attended a re-enactment and encampment of  Colonel Crawford's capture. (For those who do not know much about Ohio history his capture and torture was the response for another man's brutal massacre of approx. 100 Christian Moravian men, women and children. Because of their deeply rooted religious beliefs they did not fight back against their captors and instead prayed and sang until their time to meet their death by hammer.) Many believe that Crawford was in the wrong place at the wrong time and suffered horribly as an example to others. (Find more about Crawford here.)

The re-enactment was good and the costumes had so much thoughtful detail. As a part of it there was an encampment, various displays and artisans, and demonstrations.I pleased to find all sorts of artisan showing off their wares or demonstrating skills. This included various handmade jewelry (beaded and metal work), carved wooden flutes in the style of the Plains Indians, a type of hand weaving for belts and scarves that I had not seen before, pottery in process, a man working on braided rugs (from a local historic society), hand dipping tallow candles (I can not imagine lighting might house with animal fats, but it happened), an assortment of weapon reproductions, as well cooking. It was so nice to not only see examples of  some of these nearly forgotten crafts that were one a part of everyday life but to also see that the skills to do them were being presented.

It turned out to be a lovely afternoon.

For more information about the massacre and the history check out these links:
http://www.graveaddiction.com/gnadenhu.html
http://gnadenhutten.tripod.com/
http://en.wikipedia.org/wiki/Gnadenhutten,_Ohio
http://www.history.com/this-day-in-history/colonel-william-crawford-proceeds-toward-the-ohio
http://www.touring-ohio.com/history/crawford.html

Twisted Bead Ring

With the last bits of jewelry wire from the kit I got I made a twisted bead ring using blue and green seed beads.

To form this ring I used one piece of 'memory wire' that I beaded with blue and green seed beads, then twisted. The pearl-like bead in the center is threaded through both wires. The wire ends are secured on the bottom, looping the side with the two ends and the side with a bend securely together.

Beaded Bracelet

With the last bit of wire and beads, I made this rainbow themed wire bracelet. A little color is good for the soul.

Bottle Amulet on Beaded Necklace

Yes, another beaded project from cheap little set of beads and wire I go not long enough. This time it's a beaded necklace with a small glass jar amulet.

I used one piece of wire of desired length, the beaded a small section in the central point to wrap around the top of the bottle. (It's held in place by wrapping it around the narrow point, leaving the wider sections above and below.) I secured with a twist, then beaded the sides of the necklace. Using a small section of jewelry making chain and a clasp I finished off the necklace.

For a little more flair I used extra pink seed beads (like the ones used in the necklace) to embellish the lid, attaching them with my mini hot glue gun. I'm a bit torn on how I feel about the lid, but for now it stays.

It's all ready for perfumed oil or a "secret potion." It is that time of year again to think about Ren. Festivals.

Fire & Water Beaded Slave Bracelets

Water

More projects from that box of beads and wire I got = Fire & Water beaded slave bracelets. (For those who don't know what a slave bracelet is, it's combination bracelet/ring attached by a chain or combination of some other type of decoration.)

I started with one piece of wire about 20-24 inches long, in this case making the entire piece of jewelry out of one piece of wire. I measured approximately by wrapping it lightly around a finger, up my hand (doubling the as I used for this design), and around my wrist, leaving extra length for working on the twists and attaching the closures at the end. (Always make sure you have enough to work with, you can always trim off excess.)

Loosely fold in half. The halfway point will be approximately under your finger.

Start stringing seed beads to create a ring shape at the central point of the wire. (For the water colored one, I used a combination of blues and greens. For the fire colored one, I used a combination of yellow, red, and orange.) Measure around your finger as you go to make sure it isn't too small to go over your finger(s). A little big is better than too snug. When a ring shape was created I gave it a few tight twists (a pair of needle nose pliers to help get it tight). Then I used a slightly larger seed bead down over the twist, wrapping the wire up through the bottom, 'locking' the ring shape in place and making it easier to create the strand down the hand. Check again to make sure it fits your finger before going on. If it doesn't fit right, it's better to have to undo your work here, than later.

Now create a design of equal design down the two wires that will run the length of the hand. (I went for a twisted design, intertwining the bead colors and giving it twice the strength for attaching the bracelet and the ring.) Double check against your hand as you go to make sure it's the right length. (You can use a sharpie marker to mark length as you go. It will be covered by beads and not show in the final project.) Lock the end of each strand with a bead like from the ring shape to keep the beads from falling off the end while you are working.

Twist the two beaded strands together, giving a couple tights twists to combine them together at the end of the beads. Attach one or two of the larger seed beads down over the two pieces of wire and over the twists attaching the two strands. 'Lock' in place like with the other 'joints' to secure beads, shape, and to make it easier to work the next step.

Bead each individual wire from here to create the sides of the bracelet, using desired pattern. You want each of the sides to be about the same size so the latch is located on the central bottom part of the wrist when worn. Measure as you go. Counting and/or marking with a Sharpie to help. Always check, double check, and triple check as you go.

'Lock' the final bead like with the other transitions. (This strengthens the piece for wearing and makes things much easier to work with.) Attach the clasps to the wire, twisting securely with a pair of needle nose pliers, making sure to be mindful of sharp ends of the wire. You can use a short piece of chain on the end of one if desired to make the size adaptable or to give some extra length. (I used a short piece of chain for one and a small ring for the other.)

You can use any selection of colors of your choosing to create whatever design moves you. I love the contrast of water/air with fire. It's hard to say what they will get worn with, but I'm sure I will find something. (I always do!) I do know I love the look of this style and should have no problem finding ways to show them off.

Fire

Marie Antoinette Beaded Guillotine Choker

I love costumes and dressing up whether for stage, holidays (like Halloween), for costume parties, or just for fun. Like with most things, a lot can be found in the details. A friend of mine had a Marie Antoinette costume, complete with a bloody line drawn on from Marie's visit with the guillotine. The costume was great, but make up and fake blood can be messy, smear, and fade, especially over an evening of wear. There has to be a better (and cleaner) option for the same (or better) effect. This inspired a blood red beaded choker.

I was able to use all things I had on hand to create this choker, including the tiny beads and wire that I have from the rings I made recently mixed with some jewelry making items I had on hand from other projects. This is what I used, but it doesn't mean it's the only way to make a choker like this. (Use your imagination!)


I started with cutting one piece of wire and a small piece of chain. The chain was for the closure to make it more flexible for sizing whether for me or for someone else. (With my collection of costumes and costume pieces that often happens.) I attached the chain to one end of the end, using pliers to secure it and to make sure the pointy end of the wire was tucked in so not to scratch flesh. (No need for jewelry to hurt.) This kept the beads from falling off the opposite end while I worked.

Starting on the other end, I started to bead the thin jewelry wire with the tiny blood red beads a few at a time, pushing them all the way to the end. (It took me longer to sort the red beads out of the mixture than it took to actually bead the choker.)

Making a 'blood drop'

After a few inches, I added a few beaded 'blood drops' I made by taking a small piece of wire with the seed beads and creating a blood drop shape, then securing each 'drop' to the main piece securely twisting with needle nose pliers. I made sure to wrap the end of the wire in and then tucking inside a bead to again keep the sharp edges away from delicate neck flesh. I then added a few beads between the 'blood drops,' making the drops different sizes.

HINT: The beads are tiny, so working on a tray with a small edge to keep the beads from rolling away from you is a great idea in creating your work space. The beads are tiny and I was able to press a number of them into the tip of my finger, then beading them onto the wire from my finger tip.

 I finished beading the length of the wire with the red beads, leaving enough on the end to attach the enclosure. Using the pliers, I secured the closure to the end of the wire, cutting off the access, then again tucking the sharp end safely from scrapping skin.

It's now ready to wear. I think I want to try some tear shaped red beads next time for the blood drops.

For more information, inspiration, and ideas on Marie Antoinette check out Marie Antoinette at Wikipedia or Marie-Antoinette.org. Enjoy, explore, create, and don't be afraid to play dress up!

And remember you are only limited by your imagination.

Middle School Shop Projects

Across the country school systems are struggling to keep art and shop programs. Budget cuts of arts programs are partly the cause as well as people who consider some programs obsolete. When I was in seventh grade shop was 1/3 of a life class required (along with home ec. and a language class), by the next year the seventh grade shop was replaced by a computer skills class for 1/3 of the class. A sad commentary on the changing of times. (At least in my mind.) I was one of those kids who took in both the required 7th grade class as well as the optional 8th grade class. These classes & skills are important, more important than some school officials realize & help give kids excess to skills they might not otherwise have access to.

The aluminum owl was a project from my 7th grade shop class while we were doing metal skill work. After the hot metal was poured and let to cool completely, we filed the edges to clean it up. I have memories of my  shop teacher adding aluminum cans to the melted metal, possibly using cans for the entire metal used, but I don't know or remember. Budget-wise it would have made great sense for a public school. (It hangs on my wall even now as a piece of my past.)

The scotty dog lamp was an 8th grade shop project. Often we were given an option between two projects at a time, one being harder than the other. This was the harder of one of those options, but I do not remember the other one at the time. It was a combination of wood and electric with our choice of fabric pulled over wire mesh. To turn the light on or off, you push the tail.

Don't let Middle School or High School Ssop classes be cut.